stephen

  • An uncoated range available exclusively from Robert Horne
  • Toothy and highly tactile paper which gives your finished job an extra dimension
  • 20% post-consumer waste content with FSC certification and 50% recovered fibre - ideal for people who desire a paper with recycled content
  • Laser guaranteed, mono & colour 100 - 140g
  • Available in Smart White, Innocent White, Stormy Grey, Sultry Grey, Bored Brown, Dirty Brown, Envy Green and Deep Blue
  • Bendtsen smoothness reading
  • Bespoke makings are subject to minimum order quantities, price differentials and mill schedules
  • Elemental chlorine free
  • FSC certified product
  • Fully recyclable and biodegradable
  • Suitable for litho pre-printing
  • % recycled content
  • Monochrome laser and copier guaranteed in certain weights
  • Suitable inks required - contact our Technical Services for advice

Applications

  • annual reports
  • book/brochure covers
  • certificates
  • corporate literature
  • inserts
  • menus
  • notebooks/pads

Available In


 
Innocent white
Smart white
Sultry grey
 115 g/m2
700 x 1000		140 g/m2
700 x 1000		280 g/m2
700 x 1000		350 g/m2
700 x 1000
Innocent white o o o o
Smart white o o o o
Sultry grey   o o

Sizes shown in mm.

o Ream wrapped.
+ Bulk packed on pallets.
• Ream wrapped or bulk packed on pallets.

stephen smart white

Environmental Information

Fibre source
50% virgin wood fibre from Brazil and France, 30% pre-consumer waste and 20% post-consumer waste
Bleaching
Pulp is bleached using an Elemental Chlorine Free (ECF) process
Disposal
This material can be disposed of by recycling

Additional Information

Technical Information

Substance g/m2 (approx)115140280350
Caliper µm (approx)150193440547
Opacity (ISO) %9093
Brightness (ISO) D65113113113113
Whiteness CIE D65146146146146
Smoothness (Bendtsen) ml/min TS40040014501450
Smoothness (Bendtsen) ml/min WS40040014501450
Rigidity (Taber Stiffness Units) 15° MD7.519174297
Rigidity (Taber Stiffness Units) 15° CD4.47.783153

Technical Capability

Printing process
Litho and screen
Screen ruling
Up to 150
Printing inks
Conventional, UV and IR are preferred, however Press Open inks have been found to be satisfactory. High temperature resistant fully oxidising ink for litho pre-print when subsequent laser printing.
Embossing
Yes
Varnishing
Board substances only - Machine or UV silk screen varnishing are both possible, provided it is carried out on top of emulsion sealing. For high gloss results it will be necessary to matt UV varnish on top of emulsion sealer before gloss UV varnishing. Good results have been obtained by spot varnishing on solids or dense tones by either method. Any varnish applied directly to unprinted areas of the sheet may cause variations in gloss levels
Emulsion sealing
Board substances only - Yes
Hot foil blocking
Yes, however trials are recommended on board weights
Creasing
Pre-creasing is advisable on 280g/m² and above, by using a creasing matrix
Laser guaranteed
Yes, mono up to 140g/m² only

Accreditation

  • FSC Mixed Sources product from well managed forests, controlled sources and recycled wood or fibre.

Purchasing Policy

The Robert Horne Group is committed to the responsible purchasing of paper products. This commitment will be realised through a stepwise approach to responsible purchasing that utilises the best available techniques and information. Robert Horne requires its suppliers to abide by all local, state and national laws and international conventions. For further information and full Responsible Paper Purchasing Policy, visit:http://www.roberthorne.co.uk/environment

stephen innocent white

Environmental Information

Fibre source
50% virgin wood fibre from Brazil and France, 30% pre-consumer waste and 20% post-consumer waste
Bleaching
Pulp is bleached using an Elemental Chlorine Free (ECF) process
Disposal
This material can be disposed of by recycling

Additional Information

Technical Information

Substance g/m2 (approx)115140280350
Caliper µm (approx)150193440547
Opacity (ISO) %9093
Brightness (ISO) D6593939393
Whiteness CIE D6597979797
Smoothness (Bendtsen) ml/min TS40040014501450
Smoothness (Bendtsen) ml/min WS40040014501450
Rigidity (Taber Stiffness Units) 15° MD7.519174297
Rigidity (Taber Stiffness Units) 15° CD4.47.783153

Technical Capability

Printing process
Litho and screen
Screen ruling
Up to 150
Printing inks
Conventional, UV and IR are preferred, however Press Open inks have been found to be satisfactory. High temperature resistant fully oxidising inks for litho pre-print when subsequent laser printing.
Embossing
Yes
Varnishing
Board substances only - Machine or UV silk screen varnishing are both possible, provided it is carried out on top of emulsion sealing. For high gloss results it will be necessary to matt UV varnish on top of emulsion sealer before gloss UV varnishing. Good results have been obtained by spot varnishing on solids or dense tones by either method. Any varnish applied directly to unprinted areas of the sheet may cause variations in gloss levels
Emulsion sealing
Board substances only - Yes
Hot foil blocking
Yes, however trials are recommended on board weights
Creasing
Pre-creasing is advisable on 280g/m² and above by using a creasing matrix
Laser guaranteed
Yes, mono up to 140g/m² only

Accreditation

  • FSC Mixed Sources product from well managed forests, controlled sources and recycled wood or fibre.

Purchasing Policy

The Robert Horne Group is committed to the responsible purchasing of paper products. This commitment will be realised through a stepwise approach to responsible purchasing that utilises the best available techniques and information. Robert Horne requires its suppliers to abide by all local, state and national laws and international conventions. For further information and full Responsible Paper Purchasing Policy, visit:http://www.roberthorne.co.uk/environment

Similar Products

Paper Calculator

Use our calculator to convert your price per thousand sheets to price per tonne, or vice versa.

Enter your sheet size × mm
gsm
Enter your price       
£

More calculations

Product Showcase