Priplak r100 recycled

products

Priplak R100 Recycled is made from 100% recycled polypropylene and is also fully recyclable.

100% recycled
Fully recyclable - up to 50 times
Available in 5 different colours including white
Produced from post-production waste
High strength, low density (excellent yield)
Easily printable
Cuts and creases (similar to carton board)
Suitable for foil blocking, riveting and stitching
Suitable for welding (hot air and ultrasonic)
Resistance to dirt and chemicals
High temperature tolerance
Environmentally sound

Technical Capabilities

Printing Process: Screen printing for all grades with UV litho for selected grades. Corona treated (both sides) for UV litho/screen is guaranteed for 3 months after manufacture, 6 months for conventional screen printing. Please note: where Litho print is required, please request GT (guillotine trim) sheets when ordering.

Printing Inks: Use inks for Polypropylene. If Priplak is used within a litho printed job, (e.g. as a cover) avoid litho inks with high mineral oil distillate as Priplak can be distorted/caused to curl. Vegetable/Soya based inks or similar can reduce the distortion. check with ink supplier. It is also recommended any litho printed surface in contact with Priplak, as part of the finished job, be sealed by film lamination.

Hot Foil Blocking: Brass or steel block preferred.

Cutting and Creasing: Acclimatise to room temperature. Crease on a flat bed without channels. Hot creasing above 1400mm thick. Creasing process lengthens the material.

Print this page

Applications

book/brochure covers
coasters
displays
folding boxes
in-store graphics
membership cards
menus
packaging
packaging - luxury
packaging - protective
point of purchase/sale
promotional print
shelf strips
signs - temporary
tags/labels - horticultural
tags/labels - luggage
tickets
wallets and folders

Available In

priplak r100 recycled black 100%
priplak r100 recycled blue 100%
priplak r100 recycled green 100%
priplak r100 recycled red 100%
priplak r100 recycled white 100%

Additional Information

Technical Capability

Printing process: Litho UV (800µm or less) and screen. <br>The surface is corona treated both sides to enhance good ink key. The treatment is guaranteed for 6 months for conventional screen printing, and 3 months for UV screen printing, UV litho and UV ink jet. <br>The user must check the date on the label and not print the Priplak if the guaranteed treatment time has expired. <br>Flat Bed Digital - Priplak has been successfully printed on all leading manufacturers flat bed printing machines, however trials are recommended before use.
Printing inks: Litho/UV screen - use inks for polypropylene (ink suppliers can advise)
Hot foil blocking: Brass or steel block is preferred
Creasing: Allow Priplak to acclimatise to room temperature. Crease on a flat bed without channels. Hot creasing above 1400µm thick. The creasing process lengthens the material.
Cutting & trimming: A double cut procedure should be adopted when guillotining to minimise splitting/chipping at the edges. It is recommended that material over 800µm is die cut rather than guillotined.

Purchasing Policy

The Robert Horne Group is committed to the responsible purchasing of paper products. This commitment will be realised through a stepwise approach to responsible purchasing that utilises the best available techniques and information. Robert Horne requires its suppliers to abide by all local, state and national laws and international conventions. For further information and full Responsible Paper Purchasing Policy, visit:http://www.roberthorne.co.uk/environment

products